SUCCESS manufactures the construction hoist with very good quality and finishing to our global customers, the capacity of cage ranges from 1000kg up to 2000kg, and controlled by direct motor driven and frequency conversion driven , to reach the lower speed of 36 m/min, middle speed 0-63m/min and high speed 0-96m/min. And also provide the different dimension of cage to satisfy the special demand from the customers.
Construction hoist safety device SAJ serials pinion and cone progressive safety device is the most important safety device in the pinion and rack builder’s hoist, which can prevent the cage running over speed,and effectively reduce the ca
1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm
The switches are applicable to AC control circuits of 40 to 60Hz, with a voltage up to 500V or DC control circuits with a voltage up to 600V, and a current up to 10A to convert a mechanical signal for the purpose of controlling mechanical mo
ACOmron Limit switch series , micro switch, waterproof limit switchmicro switch , types of electrical limit switches, limit switches in the elevator is in the 380V (440V) AC voltage for controlling the construction of the building site.
Such choice of materials and spare parts in the treatment process have higher requirements and practices, in the surface treatment of spare parts, such as the coating treatment can greatly increase the service life of spare parts, spare parts will be
Since the rack tooth profile is a straight line , so that each point on the tooth profile with the same pressure angle , and equal to the inclination angle of the tooth profile , this angle is called pressure angle , standard value is 20 . e
Precisoin Custom machining steel small Gear Rack and Pinion Surface: As your requirement Material: Steel / aluminum / brass / iron / zinc / alloy Any other material and dimension depends on customers' demand. Usage: Machinery / furniture / toy / w
1.Brake: adopting D.C. normal close brake, without asbestos. Once the motor stop, the brake can hold the load safely and timely.
2.Electronic Limit Load Device: This hoist is equipped with electronic limit load device, which prevent chain being over tight.
3.Friction Clutch: which can make the motor idle running to avoid damage under overload and over tight revolving.
4.Heat Protection Device: The motor is equipped with heat protection device, which preventing the motor to be damaged under overheat.
It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil
Brakes (brake lining) generally consists of steel, insulation and adhesive friction blocks, to go through the coating to rust-proof steel, coating process using SMT-4 Temperature Tracker to detect the temperature distribution of the coating process
The Counter Roller for construction hoist,we have our own equipment, can meet the different needs of product manufacturing.provide all the products for you from Zoomlion,GJJ and Baoda.We can supply many kinds of spare parts for chinese constru